Tire Foam Cleaner Spray

Rating: Not Rated Yet


MARPA® Tire Foam Cleaner Spray (M1001-1)

  • Cleans the surface of tires fast
  • Protects tires against hardening, brittleness, and cracking by creating a very thin protective film which does not damage tire beads and covers


1) Shake the can of MARPA Tire Foam Cleaner Spray before use. It is also necessary to shake the can periodically while spraying.

2) Spray MARPA Tire Foam Cleaner evenly on the surface from about 15-25 cm of the surface.

3) To spray MARPA Tire Foam Cleaner materials easier, try to hold the can vertically. Do not tilt it more than 45 degrees relative to an imaginary horizontal line. Try to keep the spray head upward.

4) Do not clean or dry the tires with a cloth after spraying MARPA Tire Foam Cleaner. Let the Foam on tires dry by itself!

5) You can drive after you make sure the tires are dry.


  • Use MARPA Tire Foam Cleaner Spray at a good ventilated space!
  • This spray contains pressurized flammable material; keep it in a cool and dry place (with a temperature lower than 45 ° C), with adequate ventilation, away from heat, flame, and direct sun light!
  • Do not put the can of MARPA Tire Foam Cleaner Spray near the front or back windshields; and keep it away from hot air outlet of the car!
  • MARPA Tire Foam Cleaner Spray tin can is recycled after it is completely used up!
  • Do not puncture, bend or incinerate the container of MARPA Tire Foam Cleaner Spray, even after it is fully used!
  • For eye contact, flush with clean water and consult a physician!
  • If swallowed, immediately induce vomiting and call a physician!
  • If skin contact made, wash with soap and water. If irritation develops or persists, consult a physician!
  • Keep MARPA Tire Foam Cleaner Spray out of reach of children and animals!


There are yet no reviews for this product.
Vote MARPA Cleaners!
Excellent - 0%
Very Good - 0%
Good - 0%
Average - 0%
Bad - 0%

Total votes: 0
The voting for this poll has ended on: 07 Feb 2013 - 09:55