Foam Cleaner Spray (with Brush)

Rating: Not Rated Yet

Description

MARPA® Foam Cleaner Spray (with Brush) (M1000-1A)

  • Disinfectant foam which penetrates in and cleans dirt and oil rapidly
  • Fast and effective in removing stains of tea, soda, and. . . off the leather, fabric, furniture, carpets, and mattresses of the car
  • Suitable for all domestic purposes such as washing bathroom, cooker, glass, surfaces of electrical appliances, ceramic, wall paper, plastic curtains, walls painted with oil paint, porcelain, and wooden or metal floorings
  • With no adverse phosphate compounds in the environment and no sensitivity in contact with skin


DIRECTIONS

1) Shake the can of MARPA Foam Cleaner Spray before use. It is also necessary to shake the can periodically while spraying.

2) Spray MARPA Foam Cleaner directly on the stain from about 15 cm of the surface. To spray MARPA Foam Cleaner materials easier, try to hold the can vertically. Do not tilt it more than 45 degrees relative to an imaginary horizontal line. Try to keep the spray head upward.

3) After 20-30 seconds, wipe the stain with a piece of soft and clean cloth.

4) To clean thick spots, use the can brush or another coarse brush to remove the stain, and wipe it with a damp cloth.

5) Before using the product for fine fiber fabrics (such as fine carpets and other woven fine cloth), try MARPA Foam Cleaner Spray on a small hidden point to make sure the colour of fabrics do not fade and no new spots keep appearing.

6) To prevent spots on glass or metal, do not clean the foam before drying. (Wipe such surfaces after the foam dries!)

7) As for unknown metal surfaces, spray the product on a small area for a test. After 10 minutes, if there is no adverse reaction, use MARPA Foam Cleaner Spray for them.


PRECAUTIONS

  • Use MARPA Foam Cleaner Spray at a good ventilated space!
  • Avoid employing MARPA Foam Cleaner Spray directly on surfaces that are in contact with food and drink!
  • This spray contains pressurized flammable material; keep it in a cool and dry place (with a temperature lower than 45 ° C), with adequate ventilation, away from heat, flame, and direct sun light!
  • Do not put the can of MARPA Foam Cleaner Spray near the front or back windshields; and keep it away from hot air outlet of the car!
  • MARPA Foam Cleaner Spray tin can is recycled after it is completely used up.
  • Do not puncture, bend or incinerate the container of MARPA Foam Cleaner Spray, even after it is fully used!
  • For eye contact, flush with clean water! If irritation develops or persists, consult a physician!
  • If swallowed, immediately induce vomiting and call a physician!
  • Keep MARPA Foam Cleaner Spray out of reach of children and animals!

Reviews

There are yet no reviews for this product.
Vote MARPA Cleaners!
Excellent - 0%
Very Good - 0%
Good - 0%
Average - 0%
Bad - 0%

Total votes: 0
The voting for this poll has ended on: 07 Feb 2013 - 09:55